How it works
Drysure uses moisture-aborbing silica oxide beads to naturally dry out footwear, removing moisture, sweat, and odor.

While silica oside beads absorb the surrounding moisture, the specially-designed outer shell promotes even airflow to the toe and feel of your boors, where sweat and moisture build up the most. This allows for even drying throughout your boots and no wet patches!

You do not need to activate your Drysures before use. After your activity, simply insert your Drysures inside your boots or shoes.

When you have finished using your Drysures, place them back into the PVC pouch so they do not absorb the moisture in the air. You do not need to turn them on or off.

If you have access to a radiator, give them some hear. When your Drysures start to become less effective at drying, follow the instructions on how to reactivate them.

Reactivate your Drysures when drying becomes less effective using ay of the three ways below:

1. Radiator: Put them on a warm radiator.
2. Sunlight: In direct sunlight.
3. Oven: Remove the outer shell and put the bead bags on the middle shell in the oven at 212F (100C) for 1-2 hours. The best setting is Fan Assisted Oven, which is the most effective method. Please do not grill as the silica beads will melt.

No boot dryer will dry soaking wet foorwear that well without some help from you first. Here are some handy tips:

1. Pour out any water in the boots / shoes.
2. Soak up any loose, easily absorbable water with a towel or newspaper so that the boots are just very wet.
3. Give your boots a quick burst with a hairdryer to warm the moisture up.

Insert a pair of fully reactivated Drysures and leave them for about 24 hours in a dry environment.